FPGA Accelerated Flash Programming – XJFlash
The serial nature of JTAG means that programming large flash devices can be very slow. If there is a programmable logic device (such as an FPGA) connected to the flash part, XJFlash can be used to dramatically speed up the programming process quite often reaching the maximum speed for the device.
The XJFlash module uses the internal circuitry of an onboard FPGA to create a simple flash programmer. This relieves the bandwidth restricted JTAG scan chain of repetitive tasks such as shifting in control, address and data bits. By removing traffic from the scan chain, the XJTAG system is able to achieve close to theoretical programming times for a given flash memory device.
Processor Accelerated Flash Programming – XJDirect
Not all designs include a suitable programmable logic device, but many designs can access the flash device using the processor. XJDirect can be used to access the processor debug port and once again achieve greatly improved programming speeds.
If speed over JTAG is an issue, there are alternatives that can greatly improve programming speed, but since they are dependent on the specific application it is best to contact XJTAG to identify the best possible solution.
White Paper: High Speed Programming of Non-Volatile Memories
