XJTAG supplies a range of high-performance JTAG boundary scan controllers and test extension hardware products. These work with all XJTAG software, offering a fully integrated development environment for rapid test generation, real-time debug, production test execution, In-System Programming.
JTAG Boundary Scan Controllers — to connect your PC to the Unit Under Test (UUT)
PXI-XJLink2
- XJLink2 compatible
- Fits into a PXI rack for LabVIEW, LabWindows or test stand integration
Test Extension Hardware — If you have a specific requirement, please contact us
XJIO Board
- A range of digital & analogue I/Os
- Switches, LEDs, RS232/UART
- ‘Black box’ testing for non-JTAG boards
XJComms Card
- Test add-on to the XJIO Boards
- RS485/RS422, CAN, LIN, FlexRay
- Automotive test applications
XJAccelerator
- Reconfigurable FPGA board
- Supports SPI, IIC, ICSP, SWD …
- Supports NOR, NAND flash
XJAccelerator SODIMM
A multipurpose FPGA module, in SODIMM form factor, to facilitate and accelerate programming functions and extend test coverage as part of a test fixture assembly.
XJExtender Boards
For connecting a remote DUT to a JTAG controller without signal integrity issues. LVDS, up to 10 m distance.
XJIsolator
Galvanic isolation protection between a DUT and a JTAG controller. Can be easily mounted inside a test fixture.
XJXDP Adaptor
Intel® XDP header, low impedence. Provides signal matching to improve JTAG performance. Supports non-XDP applications.
XJTAG Surge Protection Board
Provides safeguards against excessive inrush current, over-current and over-voltage for the Device Under Test (DUT).
XJLink2-3070 Breakout Board
Allows the XJLink2-3070 to be powered, used and tested outside of a Keysight (Agilent) 3070 ICT machine.
ICT Relay Board
Allows an XJLink2 JTAG controller and another piece of test/programming equipment access to a UUT’s TAP control signals while fully isolating the unused instrument. Learn more »
Adaptor Boards
MAC Panel Scout Interface
Integrates XJTAG boundary scan into the SCOUT mass interconnect system. Supplied with customised MAC Panel DAK adapter, connects a PXI-XJLink2 to the SCOUT interface.
View User Manual
Signal Breakout Board
Allows oscilloscope or test meter access to the signals used when connecting the XJLink2 JTAG Controller to a DUT.
Order code: XJTAG-XJA-0080.
Schematic diagram
Splitter / Signal Integrity Board
20-way 0.1” into two 20-way 0.1” connectors. Improves signal integrity by putting a ‘hard ground’ between each active signal.
Order code: XJTAG-XJA-0030.
Schematic diagram
STEP model
Splitter / Signal Integrity Board SFF
20-way 0.1” into two 20-way 0.1” connectors. ‘Hard grounds’ between active signals. Small Form Factor. Fits XJQuad.
Order code: XJTAG-XJA-0031.
Schematic diagram
Splitter / Signal Integrity Board PXI
20-way MDR connector into two 20-way 0.1” connectors. ‘Hard grounds’ between active signals. Fits PXI-XJLink2.
Order code: XJTAG-XJA-0032.
Xilinx Adaptor
20-way 0.1” connector to a standard Xilinx 14-way 2 mm connector.
Order code: XJTAG-XJA-0040.
Schematic diagram
0.1” to 2 mm Adaptor
20-way 0.1” connector to a 20-way 2 mm connector.
Order code: XJTAG-XJA-0050.
Schematic diagram
0.1” to 1.27 mm Adaptor
20-way 0.1” connector to a 20-way 1.27 mm connector.
Order code: XJTAG-XJA-0060.
Schematic diagram
2x 10-way 2 mm Adaptor
20-way 0.1” connector into two 10-way 2 mm connectors.
Order code: XJTAG-XJA-0010.
Schematic diagram
2x 10-way 0.1” Adaptor
20-way 0.1” connector into two 10-way 0.1” connectors.
Order code: XJTAG-XJA-0100.
Schematic diagram
For support, or for a quote on any part of the XJTAG system, please contact us.
